| Jenco Vietnam | Model: IP-600-10 |
| pH electrode for 6309PDTF | |
| Jenco Vietnam | Model: Oxysens120 |
| DO electrode | |
| Jenco Vietnam | Model: 6308PT |
| pH controller | |
| Jenco Vietnam | Model: IP-600-9TH |
| pH electrode with ATC | |
| IMR Vietnam | Correct: IMR 500 P |
| Portable and Continuous working | |
| Flue Gas Dryer. | |
| principle permeation tube | |
| drying capacity up to 2.5 l/min | |
| heated hose 1.5 meter | |
| filter element | |
| gas probe tube 250 mm | |
| with thermoelement Type K | |
| gas hose & thermocable 1.5 meter | |
| with plug on both side to connect | |
| IMR 500 with gas analyzer carrying case | |
| 115V 60 Hz or 230V 50 Hz | |
| (IMR 500) | |
| Greisinger Vietnam | Code: GTH175/PT-K (GTH 175 PT-K) |
| Core temperature measurement instrument, Pt1000 | |
| Greisinger Vietnam | Special design types: e.g. probe cable in another length, sensor tube in another length |
| Note: On request | |
| Greisinger Vietnam | WPT3 |
| Calibration Certificate (-20, 0, 60 °C) | |
| Greisinger Vietnam | GKK252 |
| Universal case (235 x 185 x 48 mm) with foam lining | |
| Underwater Kinetics Vietnam | Model: UK 609 Dry Box |
| Code: 00523 | |
| stainless steel tube | |
| Body is make by plastic ABS | |
| Liner rubber cap, silicone gasket | |
| Waterproof, shockproof | |
| Dimension: 23.88 cm x 18.29 cm x 15.75 cm | |
| Weight: 771g | |
| (Underwater Kinetics 609 Dry Box 00523) | |
| Underwater Kinetics Vietnam | Model: UK C8 LED |
| 8 pin Alkaline | |
| beam: 500 Feet | |
| Light: 257 lumens | |
| 2 Led White | |
| Dept: 200m in water | |
| (UK C8 eLED (L1), Safety Yellow 19520) | |
| Raytek Vietnam | Code: RAYCI 2-B-10L |
| RAYCI: Included with each CI sensor are a 1 meter (3.3 ft) preinstalled cable, two mounting nuts and an operator’s manual. The CI has 4:1 optical resolution and the spectral response of the sensor is 7.6 – 18 microns. | |
| 2: Type K thermocouple output | |
| B: +/- 3°C accuracy between 100 to 500° C (86 to 932°F) | |
| 10L: 3m (10′) cable (in place of 1m cable) MAX 105 ° C (220 °F) | |
| Pall Vietnam | Code: 88033400 |
| Schumalith Filter Cylinder | |
| Type: 20 | |
| Do/Di (mm): 50/20 | |
| Length: 135mm | |
| Kimo Vietnam | Code: SFK-TB-15-6-100-MM (SFKTB156100MM) |
| Thermocouple K | |
| Sunon Vietnam | Code: SF8025AT |
| Beckhoff Vietnam | Bus Terminal |
| BK5120 | |
| Beckhoff Vietnam | Bus Terminal |
| KL1408 | |
| Matsui Vietnam | Temperature sensor |
| 10K-3450 , For MCP-6500 | |
| Matsui Vietnam | Gear motor |
| GFP-18-240-S60W, For SGP-1800 | |
| Weight: 4 kg | |
| HR Vietnam | Model: NHR-1100A-14-X/2/X-A |
| Hans Schmidt Vietnam | Model: TEM-I |
| Moisture meter with standard accessories (complete) | |
| Consisting of basic type TEM with analog display, measuring cable 50200M, electrode holder 50204M, needle electrodes 50205M and 50207M | |
| Hans Schmidt Vietnam | Model: 50299M |
| Calibration Electrode | |
| Calibration electrode (299) with a fixed calibration value | |
| Koganei Vietnam | Correct: 110-4E1-PLL-DC24V |
| Air Valve | |
| (110-4E1-PLL 0.15-0.7MPa E789) | |
| KG Auto Vietnam | Art no: KGS-H3R2 |
| Sick Vietnam | Sensor |
| Model: CLV432-6010 | |
| Code: 1017983 | |
| Specchio Oscillante, short range | |
| Sick Vietnam | Sensor |
| Model: CLV432-6010 | |
| Code: 1017983 | |
| Specchio Oscillante, short range | |
| Sick Vietnam | Sensor |
| Model: CLV432-6010 | |
| Code: 1017983 | |
| Specchio Oscillante, short range | |
| Crouzet – Crydom – Bei Vietnam | P/N: 84873034 |
| EWS2 3PHASE CTRL RLY 230-440VAC | |
| MIKRO Vietnam | Model: PFR96P-415-50 |
| ELECTRONICON Vietnam | Tụ bù 10KVAR-230V (kích thuớc 95×196 ,trọng luợng : 1,3 kg |
| Model: MKPc-10K-230 | |
| (MMB-235050KT) | |
| Schneider Vietnam | Code: LC1D80E7 |
| CONTATTORE 80A 48VAC 50/6 | |
| Crouzet – Crydom – Bei Vietnam | Part no: 84873004 (84 873 004) |
| Decription: EWS2 3 * 200/460 VAC | |
| Burkert Vietnam | 634803 KOMP-480-1062 -N1-00633295 |
| Burkert Vietnam | 634804 KOMP-480-1062 -N1-00633298 |
| Burkert Vietnam | 552075 Elektrische Stellungsanzeige 1062-7-B-B-BCH/DC-K1 |
| Burkert Vietnam | Magnetventil |
| 6014-C-2,0-FF-MS-GM82-5-24/DC-08*HA17 | |
| Art-Nr.: 125 349 | |
| (6014 C | |
| Art no: 00125349) | |
| Schneider Vietnam | Replaced by: XS9C4A2A2G13 |
| (Plug proximity transducer for inlet valve. | |
| Type : XSC-H203629 | |
| Input : 24V DC | |
| Output : 4~20 mA) | |
| GF Vietnam | Code: 199190108 |
| (DSR500-3) | |
| Parker Vietnam | Code: 590C/0350/5/3/0/1/0/00 |
| Siemens Vietnam | Code: 3RT1916-1BB00 |
| Proface Vietnam | Replaced by: PFXGP4501TADW |
| (GP2501-TC41-DC24V) | |
| Ximaden Vietnam | SOLID RELAY |
| Code: H375ZF | |
| Ximaden Vietnam | SOLID RELAY |
| Code: H380ZF | |
| Flowserve Vietnam | 3211MD-28-D6-M-04-40-0S-00 |
| No. 70-VD 262875.999.000ASSY, LOGIX 3000 MD SERIES, ADVANCED, ATEX Ex d, DDSHAFT, M20, 4-WAY, EXTENDED TEMP (- 40), STAINLESS GAGES, NO SPECIALS, Mtl Code N/A: See Drawing, P.O., or BOM Assembly (Rev’d per ECO 13949) | |
| (Model: 3211MD-28-D6-M-04-40-OS-00 | |
| P/N: 262875.999.000 – 4-20mA, SMART, HART, I.S) | |
| Sick Vietnam | Code: ATM60-A1A0-K19 |
| Art no: 1034294 | |
| Sick Vietnam | Code: ATM60-A1A0-K18 |
| Art no: 1034293 | |
| Sick Vietnam | Code: AFM60B-SZAA0-S04 |
| Art no: 1038872 | |
| Sick Vietnam | Correct: ATM60-A4A12X12 |
| Art no: 1030001 | |
| (ATM60-A4A12X2) | |
| EBM Vietnam | Correct: D2D160-BE02-11 |
| Weight: 11.5 kg/pc | |
| (D2D160-BE02-211) | |
| Yamada Vietnam | NDP-15FPT – SP |
| DIAPHRAGM PUMP 1/2” 851699 NPT/CAP | |
| Code: 1500DP | |
| (Model: NDP 15 FPT-cap | |
| Item No: 851699 | |
| ENV Temp: 32-158F | |
| Liquid Temp:32-158F | |
| Max Air Pressure :100psi) | |
| Crouzet – Crydom – Bei Vietnam | XH25D-SS-1024-ABZC-28V/V-SM18 |
| P/N: 01002-8500 | |
| (XH25-SS-1024-ABZ-C-28V/V-S-M18-S) | |
| Crouzet – Crydom – Bei Vietnam | XH25D-SS-5000-T2-ABZC-28V/V-SM18 |
| P/N: 01005-1311 | |
| (XH25-SS-5000-ABZ-C-28V/V-S-M18-S) | |
| Vishay Vietnam | Power Rectifier Diodes (T-Modules) 400V, 70A |
| Part No: VS-T70HF40 | |
| Order Code: 1463210 | |
| (T70HF40) | |
| Ecom-ex Vietnam | THERMOMETERS |
| Correct: Ex-MP4A | |
| (ex-mp4) | |
| Becker Vietnam | Pump |
| Model: DT4.40k | |
| AGR Vietnam | C203-AF |
| VBG/PVG W/AUTOFEED | |
| The VBG7000 with Autofeed is an automatic, non-destructive measuring system for neck finish, body dimensions and overall height. | |
| Includes: | |
| Measuring unit, based on movable, high-resolution CCD matrix camera technology | |
| Integrated robotic handling system using high-speed, ultra-precision servo motors | |
| Computer with display for control and results presentation | |
| Integrated computer swing arm assembly | |
| Bottle centering device | |
| Features | |
| Comprehensive finish library based on industry standard bottle finishes for rapid job setup | |
| Standard test routines and tools for measuring bottle-related features and attributes including but not limited to: | |
| Industry standard dimensional finish measurements (A, T, E, etc.) | |
| Tilt | |
| Body Diameter | |
| Height (See brochure for additional performance details) | |
| Specifications | |
| Estimated Crate Size/Weight: | |
| 216 x 130 x 205 cm / 500 kg | |
| THE ABOVE ITEM INCLUDES THE FOLLOWING CONFIGURATION OPTIONS. | |
| CONFIGURATION DESCRIPTION | |
| OPTION, MACHINE CONFIGURATION PVG4100 Q’ty: 1 | |
| OPTION, INPUT VOLTAGE 230 Q’ty: 1 | |
| OPTION, POWER CORD AMERICA Q’ty: 1 | |
| OPTION, USER-INTERFACE LANGUAGE ENGLISH Q’ty: 1 | |
| OPTION, BORE MEASUREMENT NONE Q’ty: 1 | |
| OPTION, PUSH-UP GAUGE NONE Q’ty: 1 | |
| OPTION, VBG7000 ANTI-ROCK NO Q’ty: 1 | |
| OPTION, WEIGHT GAUGE PREFORM_WG Q’ty: 1 | |
| OPTION, WEIGHT GAUGE PREFORM INSERT #1 0.750 IN Q’ty: 1 | |
| OPTION, WEIGHT GAUGE PREFORM INSERT #2 2.063 IN Q’ty: 1 | |
| OPTION, PREFORM TRAY ASSEMBLY 99_POS Q’ty: 1 | |
| OPTION, PREFORM TRAY OVERLAY #1 0.750 IN_99-POS Q’ty: 1 | |
| OPTION, PREFORM TRAY OVERLAY #2 2.063 IN_99-POS Q’ty: 1 | |
| OPTION, PREFORM HOLDER INSERT #1 20.65MM Q’ty: 1 | |
| OPTION, PREFORM HOLDER INSERT #2 52.40MM Q’ty: 1 | |
| (Model: PVG4100) | |
| AGR Vietnam | 6203015-01 |
| OVERLAY, PREFORM, 99 POS 0.750″ | |
| AGR Vietnam | 6203015-22 |
| OVERLAY, PREFORM, 99 POS 2.063″ | |
| AGR Vietnam | 6203017 |
| BOTTLE TRAY ASSEMBLY | |
| AGR Vietnam | 6203018 |
| PREFORM TRAY ASSEMBLY, 99 POSITION | |
| AGR Vietnam | 6203025 |
| PREFORM TRAY ASSEMBLY, AUTOFEEDER 99 | |
| POSITION – OPTION | |
| AGR Vietnam | CRATE-VBG |
| VBG / PVG PACKING CHARGE | |
| AGR Vietnam | K203002-230 |
| VBG/PVG W/AUTOFEEDER RECOMMENDED SPARE | |
| AGR Vietnam | K203004 |
| BORE GAUGE RECOMMENDED SPARE PARTS | |
| AGR Vietnam | K203005 |
| PUSH UP RECOMMENDED SPARE PARTS | |
| AGR Vietnam | K203009 |
| R & R VALIDATION OBJECT | |
| AGR Vietnam | C522 |
| LIGHT POLARIZER | |
| The Light Polarizer is a viewing device for detecting material flows and stresses in PET and PEN preforms. | |
| Features: | |
| Ability to view images in full color 185x400mm (7.25-15.75in) polarizing field with light source Illuminator with 15W fluorescent light source with integrated on/off switch | |
| Table-mounted unit with adjustable viewing angle | |
| Reference poster for identification of preform defects included | |
| Includes a CD Instruction Manual. | |
| Estimated Crate Size/Weight: 21″L x 21″W x 21″H / 40 lb. | |
| 54L x 54W x 54H (cm) / 19 kg. | |
| AGR Vietnam | CRATE-LP |
| LIGHT POLARIZER PACKING CHARGE | |
| AGR Vietnam | 6526001 |
| PREFORM CUTTER, 6-35MM | |
| AGR Vietnam | Installation and training for Preform Vision Gauge (PVG): |
| AGR Vietnam | Service fee (4 working day + 1 traveling day) |
| AGR Vietnam | Air ticket & local traveling expense |
| (Local transport and accommodation in Vietnam arranged/covered by customer) | |
| FEILING Vietnam | Model: E18-DS30NA |
| EGE Vietnam | Air Flow Sensor |
| Type: LNZ 450 GA-S | |
| Id No: P11111 | |
| Chuanfan Vietnam | CRB0555623 |
| MODEL: RB-055 | |
| 3.7KW 3φ 220/380V | |
| 50/60HZ BLOWER | |
| ABB Vietnam | Inverter |
| Type: ACS550-01-012A-4 | |
| P= 5.5KW | |
| Input:380-480V | |
| I=11.9A,48-63Hz | |
| Output:0-380/480V,0-500Hz | |
| INBOR Vietnam | Correct: YB-88GZ-4 |
| (YB-88G) | |
| INBOR Vietnam | Correct: YB-88GZ-4 + YB-88GJ (trọn bộ) |
| (YB-88G) | |
| Celduc Vietnam | Code: SAL941460 |
| 12A/12-280VAC/Input 3-32VDC/Led | |
| Tohnichi Vietnam | Code: 20FTD2-S |
| Dial Indicating Torque Screwdriver FTD-S Series | |
| Posital-Fraba Vietnam | Code: MCD-S101B-1212-Y060-PRL |
| BTI Vietnam | Non contact coded safety switches – Stand alone operation |
| Correct: FURTIF OPTO2S | |
| (OPTO2S) | |
| Imada Vietnam | Code: DS2-50N |
| Imada Vietnam | Code: ZTS-50N |
| STROMAG Vietnam | Stromag aux. current geared cam limit switch limit Series 110 |
| Type: 166 NE – 6 EX FV (166NE-6EX FV) | |
| Mounting: B3/B5 foot/flange | |
| Protection IP 65 | |
| with 6 pcs of explosion proof contacts EEx D IIC T6 with 3 meter cable for each contact | |
| Same as existing unit with Auftr. Nr. 136592 | |
| Pfannenberg Vietnam | ĐÈN BÁO CHỐNG CHÁY NỔ |
| Model: CWB-ATEX | |
| Part No.: 31006905000 | |
| Thông số kỹ thuật: | |
| – Điện áp: 24VDC ±10% | |
| – Đèn màu: ĐỎ | |
| – Chống nổ: II 2G Ex de IIC T6 | |
| II 2G Ex de IIC T5 | |
| IID Ex dt A21 IP66 T80oC IID Ex dt A21 IP66 T100oC | |
| – Khu vực: 2G (Zone 1) / 3G (Zone 2) | |
| 2D (Zone 21) / 3D (Zone 22) | |
| – Flash: 5J | |
| – Cấp bảo vệ: IP66 | |
| – Trọng lượng: 1.24kg | |
| Wadeco Microwave sensor Vietnam | Microwave Level Switch |
| Type No. MWS-24TX/RX-24V | |
| DC24V ±10% | |
| (MWS-24TX-24V) | |
| Koganei Vietnam | Correct: 180-4E2-PSLN-AC100V |
| (180-4E2-PSLN 90-132VAC) | |
| Koganei Vietnam | Code: CS2B (CS 2B) |
| Koganei Vietnam | Code: CS3B (CS 3B) |
| Zieh Abegg Vietnam | Code: QK10A-4EM.78.CH |
| Art no: 210800 | |
| Wise Vietnam | LOW PRESSURE GAUGE |
| MODEL: P421 | |
| ELEMENT TYPE PRESSURE CHAMBER | |
| NOMINAL DIAMETER 100mm | |
| ACCURACY ±1.5% OF F.S | |
| OVER RANGE PROTECTION 130% OF F.S | |
| MATERIAL :CASE&COVER 304SS | |
| ELEMENT & PRESSURE CONNECTION 316SS | |
| WINDOW SAFETY GLASS | |
| MOVEMENT BRASS (ONLY AVAILABLE) | |
| MOUNTING TYPEA: BOTTOM CONNECTION, DIRECT | |
| CONNECTION 1/2″NPT(M) | |
| POINTER ALUMINIUM ALLOY, BLACK PAINTED | |
| DIAL WHITE ALUMINIUM WITH BLACK GRADUATIONS | |
| Code: P4214A4EDG07030 | |
| Range: 0 ~ 1000 mmH2O | |
| (P4214A4EDG07031, | |
| range: 0-1000 mmH2O) | |
| HAWE Hydraulics Vietnam | Correct: KA 24 SK/H 0,91-B 3/350-WH 1 F 11/3-X24-X84WA |
| 3 X 400 V 50 HZ | |
| Compact pump unit | |
| weight: 17,0 kg/pc | |
| (KA 24 SK/H 0.91-B 3/350-WH 1F-11/65-X 84 WAV) | |
| Bernstein Vietnam | Limit Switch |
| Art.-No. 6081185009 (608.1185.009) | |
| ENK-SU1Z AHS-V | |
| Rosemount Vietnam | Pressure Transmitter |
| 2051CD 2 A 0 2 A 1 A S5 I1 M4 Q4 | |
| Rosemount Vietnam | Pressure Transmitter |
| 3051CD3A22A1AM5B44DF | |
| Nitto-kohki Vietnam | No: 313080600 |
| 800PH STEEL W/OUT VALVE | |
| Nitto-kohki Vietnam | No: 313180400 |
| 800SM STEEL SG W/VALVE | |
| Sakae Vietnam | 13FLP25A |
| ?K-OHM +/-20%, Lin.+/-1.5% | |
| Unit weight: 0.2kgs | |
| Brooks Vietnam | 3809G E/TFE-Lined Armored Flowmeter |
| 3809GBE12CFAB1A00000 | |
| Description: 3809G (Vertical Inlet, Vertical Outlet) | |
| Material of Construction: E (316 / 316 L SS E/TFE With DIN 3.1.B Certification) | |
| Construction: A (Threaded Female Standard) | |
| Meter & Connection Size: 12 (Size 12, 1.5”) | |
| Float: C (Float C (PVDF)) | |
| Connection Type: F (1.5 inch ANSI 150# RF) | |
| Scale Type / Fluid: A (Single DR-Scale / Liquid) | |
| Meter Accuracy: B (2% FS) | |
| Indicator Configuration: 1 (Aluminium Housing Epoxy Painted) | |
| Electronics Configuration: A (None) | |
| Electrical Connection: 0 (None) | |
| Certifications: 0 (None) | |
| Accessories: 0 (None) | |
| Processes With Certificates (Group 1): 0 (None) | |
| Processes With Certificates (Group 2): 0 (None) | |
| Brooks Vietnam | Cert of conformance |
| Brooks Vietnam | Cert of origin from chamber of commerce |
| Brooks Vietnam | Cert of calibration 3.1 |
| Brooks Vietnam | Material cert 3.1 |
| Masibus Vietnam | Scanner |
| Ordering code: 85XXBIF9YU12RP1RR | |
| Unit weight: 3kgs. | |
| Mares Vietnam | Bộ kính và ống thở |
| MARES TANA (SET) BLACK – 411734 | |
| Mares Vietnam | Chân vịt |
| MARES QUATTRO 4 POWER FINS – 410301 | |
| Mares Vietnam | Bộ dồ liền thân 5mm |
| MARES WETSUIT ROVER OVERALL | |
| 5MM – 412355 | |
| Mares Vietnam | Chân vịt |
| MARES QUATTRO 4 POWER FINS – 420404 | |
| Chì cục(1.5/kg/cục) | |
| WEIGHT BLOCK 1.5KG – L00020 | |
| Chì cục(1.0/kg/cục) | |
| WEIGHT BLOCK 1.0KG – l000001 | |
| Dây deo chì và khóa nhựa | |
| IST WEIGHT BELT W. PLASTIC BUCKEL | |
| – BT1 + BB1 | |
| Dây deo chì và khóa inox | |
| IST WEIGHT BELT WITH | |
| STAINLESS BUCKEL – BT1 + BB2 | |
| Schneider Vietnam | Code: LC1D80E7 |
| CONTATTORE 80A 48VAC 50/6 | |
| Schneider Vietnam | Code: LC1D80E7C |
| (Code: LC1D80E7 | |
| CONTATTORE 80A 48VAC 50/6) | |
| Lambda-TDK-Densi Vietnam | Correct: HWS1500-24/HD |
| (HWS1500-24/HD HFP) | |
| Alerton Vietnam | Code: VLC-550 |
| Carel Vietnam | IR33W7LR20 |
| Description: IR33 UNIVERSAL 2NTC/PTC/PT1000, 2 RELAYS 2DO, BUZ, IR, 1224VAC, (12-30 VDC) | |
| (IR32W00000) | |
| MAC3 Vietnam | Elettrososnda Model BD 220v AC |
| Correct: ED4SC01000 | |
| (Electrosonda DB) | |
| Epsitec Automazione Pneumatica CKD Vietnam | Vacuum break vavle |
| Model: DS-01AN | |
| Baumer Vietnam | Code: POG 10 DN 1024 I |
| Incremental Encoder Optical | |
| – Incremental Encoder | |
| – Marine air protected / tropicalized | |
| – B10, Shaft 11k6 x 30, IP 66 | |
| – Logic level: HTL | |
| – UB = +9… +30 VDC | |
| – Square ware outputs: K1, K1′, K2, K2′, K0, K0′ | |
| – Incr./turn: Z = 1024 | |
| – Standard Version | |
| KSR Kuebler Vietnam | Magnetic float Level switch |
| Replaced by: ALE/V/R-1-V/SSS-L300/08-1/SVK27/10/A | |
| • design pressure: 0 / 0.5 bar • working pressure: 0 / 0.5 bar • density: 800 kg/m³ • design temperature: -10 / 180 °C • working temperature: -10 / 180 °C • ambient temperature: -10 / 80 °C electrical connection • ALE: housing 64 x 58 x 34 mm in aluminium with cable entry M20 x 1.5 mm / IP65 ( not possible with transmitter) process connection • V: material quality stainless steel 1.4404 / 1.4435 / 1.4571 ( 316L & 316Ti ) • R: process connection thread to float direction G / BSP • nominal bore: 1″ guide tube • V: material quality stainless steel 1.4404 / 1.4435 / 1.4571 ( 316L & 316Ti ) • 08: tube outside diameter Ø 8.00 mm • L [mm] / M [mm]: L = 300 mm | |
| Note: Pls confirm before order: | |
| S: switch function normally open L1 = ??? mm ß please advise • S: switch function normally open L2 = ??? mm ß please advise | |
| • S: switch function normally open L3 = ??? mm ß please advise | |
| (ARV-VSSS-L300/8-V27A) | |
| Turck Vietnam | Correct: C7-A20FX/24VDC |
| (Model: C7-A20FX) | |
| Celduc Vietnam | Code: SAL942460 |
| 23A/12-280VAC/Input 3-32VDC/Led | |
| STORD Vietnam | Code: GM40-8J |
| STORD Vietnam | Code: GM40-4J |
| AGR Vietnam | C203-AF |
| VBG/PVG W/AUTOFEED | |
| The VBG7000 with Autofeed is an automatic, non-destructive measuring system for neck finish, body dimensions and overall height. | |
| Includes: | |
| Measuring unit, based on movable, high-resolution CCD matrix camera technology | |
| Integrated robotic handling system using high-speed, ultra-precision servo motors | |
| Computer with display for control and results presentation | |
| Integrated computer swing arm assembly | |
| Bottle centering device | |
| Features | |
| Comprehensive finish library based on industry standard bottle finishes for rapid job setup | |
| Standard test routines and tools for measuring bottle-related features and attributes including but not limited to: | |
| Industry standard dimensional finish measurements (A, T, E, etc.) | |
| Tilt | |
| Body Diameter | |
| Height (See brochure for additional performance details) | |
| Specifications | |
| Estimated Crate Size/Weight: | |
| 216 x 130 x 205 cm / 500 kg | |
| THE ABOVE ITEM INCLUDES THE FOLLOWING CONFIGURATION OPTIONS. | |
| CONFIGURATION DESCRIPTION | |
| OPTION, MACHINE CONFIGURATION PVG4100 Q’ty: 1 | |
| OPTION, INPUT VOLTAGE 230 Q’ty: 1 | |
| OPTION, POWER CORD AMERICA Q’ty: 1 | |
| OPTION, USER-INTERFACE LANGUAGE ENGLISH Q’ty: 1 | |
| OPTION, BORE MEASUREMENT NONE Q’ty: 1 | |
| OPTION, PUSH-UP GAUGE NONE Q’ty: 1 | |
| OPTION, VBG7000 ANTI-ROCK NO Q’ty: 1 | |
| OPTION, WEIGHT GAUGE PREFORM_WG Q’ty: 1 | |
| OPTION, WEIGHT GAUGE PREFORM INSERT #1 0.750 IN Q’ty: 1 | |
| OPTION, WEIGHT GAUGE PREFORM INSERT #2 2.063 IN Q’ty: 1 | |
| OPTION, PREFORM TRAY ASSEMBLY 99_POS Q’ty: 1 | |
| OPTION, PREFORM TRAY OVERLAY #1 0.750 IN_99-POS Q’ty: 1 | |
| OPTION, PREFORM TRAY OVERLAY #2 2.063 IN_99-POS Q’ty: 1 | |
| OPTION, PREFORM HOLDER INSERT #1 20.65MM Q’ty: 1 | |
| OPTION, PREFORM HOLDER INSERT #2 52.40MM Q’ty: 1 | |
| (Model: PVG4100) | |
| AGR Vietnam | 6203015-01 |
| OVERLAY, PREFORM, 99 POS 0.750″ | |
| AGR Vietnam | 6203015-22 |
| OVERLAY, PREFORM, 99 POS 2.063″ | |
| AGR Vietnam | 6203017 |
| BOTTLE TRAY ASSEMBLY | |
| AGR Vietnam | 6203018 |
| PREFORM TRAY ASSEMBLY, 99 POSITION | |
| AGR Vietnam | 6203025 |
| PREFORM TRAY ASSEMBLY, AUTOFEEDER 99 | |
| POSITION – OPTION | |
| AGR Vietnam | CRATE-VBG |
| VBG / PVG PACKING CHARGE | |
| AGR Vietnam | K203002-230 |
| VBG/PVG W/AUTOFEEDER RECOMMENDED SPARE | |
| AGR Vietnam | K203004 |
| BORE GAUGE RECOMMENDED SPARE PARTS | |
| AGR Vietnam | K203005 |
| PUSH UP RECOMMENDED SPARE PARTS | |
| AGR Vietnam | K203009 |
| R & R VALIDATION OBJECT | |
| AGR Vietnam | C522 |
| LIGHT POLARIZER | |
| The Light Polarizer is a viewing device for detecting material flows and stresses in PET and PEN preforms. | |
| Features: | |
| Ability to view images in full color 185x400mm (7.25-15.75in) polarizing field with light source Illuminator with 15W fluorescent light source with integrated on/off switch | |
| Table-mounted unit with adjustable viewing angle | |
| Reference poster for identification of preform defects included | |
| Includes a CD Instruction Manual. | |
| Estimated Crate Size/Weight: 21″L x 21″W x 21″H / 40 lb. | |
| 54L x 54W x 54H (cm) / 19 kg. | |
| AGR Vietnam | CRATE-LP |
| LIGHT POLARIZER PACKING CHARGE | |
| AGR Vietnam | 6526001 |
| PREFORM CUTTER, 6-35MM | |
| AGR Vietnam | Installation and training for Preform Vision Gauge (PVG): |
| AGR Vietnam | Service fee (4 working day + 1 traveling day) |
| AGR Vietnam | Air ticket & local traveling expense |
| (Local transport and accommodation in Vietnam arranged/covered by customer) | |
| AGR Vietnam | Annual Service and Calibration |
| Agreement for your Agr measuring instruments. We have collected here below the main points included in the more detailed agreement enclosed. | |
| • 1 visit annually | |
| • Cleaning of units | |
| • Free phone service | |
| • Possibility for extra training during the maintenance visit | |
| • Calibration and preventive maintenance done with each visit | |
| • 2.5% discount on spare parts for machine regarding the agreement | |
| • Release of certificate of calibration after each visit for each machine | |
| Equipment: | |
| PVG | |
| Light Polarizer | |
| Pneutrol Vietnam | F10SSK |
| 1/8in NPT FLOW CONTROL VALVE | |
| STAINLESS | |
| (Code: F 10 SS) | |
| Schneider Vietnam | Code: TSXDMZ28DR |
| MOD. 16 ING.+ 12 USC. RELE’ MORS. | |
| E+H Vietnam | PMC51-2AWA1/101 |
| Cerabar M PMC51 | |
| additional specifications: | |
| Low range value 0.000 mbar | |
| Upper range value 400.000 mbar | |
| 2nd value display none | |
| Damping [s] 00000002 | |
| Tag plate Stainless Steel 52006326 | |
| LT 1.8 0231A-BL1 | |
| LT 2.4 0231B-BL1 | |
| LT 3.4 0231C-BL1 | |
| (Code: PMC51-AA21JD1FGJAFFL+AAPAZ1) | |
| Bernstein Vietnam | Limit Switch Type D-U1 RW |
| Art no: 6041118008 (604.1118.008) | |
| 16A 500VAC | |
| Gardner Denver Vietnam | Bộ lọc khí (ESP 70) |
| VP1027106 | |
| VP1027106 IS CODE OF MOTOR. VP1008518 = AIR FILTER. THIS LIST PRICE IS FOR AIR FILTER | |
| Gardner Denver Vietnam | Bộ lọc dầu |
| 89755919 | |
| OIL FILTER T25 | |
| Gardner Denver Vietnam | Bộ tách dầu |
| 3340028 | |
| 03340028 IS REPLACED BY CC1053700 | |
| Gardner Denver Vietnam | Bộ làm kín của van xả: |
| 3982138 | |
| ITEMS 4 – 4,6 = SEAL KIT 89783319 | |
| Mỗi bộ gồm: | |
| Gardner Denver Vietnam | Retaining ring |
| Item 11 of discharge valve | |
| Gardner Denver Vietnam | O ring |
| Item 13 of discharge valve | |
| Gardner Denver Vietnam | Seal kit iteam 9 |
| 89783319 | |
| Gardner Denver Vietnam | Seal kit iteam 12 |
| 89783319 | |
| Gardner Denver Vietnam | Seal kit iteam 14 |
| 89783319 | |
| Gardner Denver Vietnam | Seal kit iteam 15 |
| 89783319 | |
| Gardner Denver Vietnam | Bộ làm kín của van xả: |
| 3982138 | |
| ITEMS 4,7 – 4,8 = REPAIR KIT 89808639 | |
| Mỗi bộ gồm: | |
| Gardner Denver Vietnam | Retaining ring |
| Item 11 of discharge valve | |
| Gardner Denver Vietnam | O ring |
| Item 13 of discharge valve | |
| Gardner Denver Vietnam | Seal kit iteam 9 |
| 89783319 | |
| Gardner Denver Vietnam | Seal kit iteam 12 |
| 89783319 | |
| Gardner Denver Vietnam | Seal kit iteam 14 |
| 89783319 | |
| Gardner Denver Vietnam | Seal kit iteam 15 |
| 89783319 | |
| Gardner Denver Vietnam | Iteam 6 |
| 89808639 | |
| Gardner Denver Vietnam | Iteam 16 |
| 89808639 | |
| Gardner Denver Vietnam | Bộ phận làm kín của van hút: VP1011307 |
| ITEMS 5 – 5,1 = INLET VALVE SEAL KIT | |
| Mỗi bộ gồm: | |
| Gardner Denver Vietnam | Seal kit assy iteam: 4 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 5 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 6 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 7 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 8 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 10 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 12 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 13 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 14 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 15 |
| VP1011307 | |
| Gardner Denver Vietnam | Repair kit VP103564 |
| CORRECT NUMBER IS VP1039564 = REPAIR KIT | |
| Mỗi bộ gồm: | |
| Gardner Denver Vietnam | Seal kit assy iteam: 4 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 5 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 6 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 7 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 8 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 10 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 12 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 13 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 14 |
| VP1011307 | |
| Gardner Denver Vietnam | Seal kit assy iteam: 15 |
| VP1011307 | |
| Gardner Denver Vietnam | Iteam:21 ( spring) |
| VP103564 | |
| Gardner Denver Vietnam | Khớp nối VP1030481 |
| COUPLING SPIDER 55 (98 Sh A-GS) RED | |
| Gardner Denver Vietnam | Ống dẫn Ø10mm |
| 85200299 PA11 10/8 T/LOT: 273190 07/05 | |
| CORRECT NUMBER IS 85138809 | |
| Gardner Denver Vietnam | Ống dẫn Ø6mm |
| 85200299 PA116/4 TT N0: 359349 | |
| 85200299 | |
| Gardner Denver Vietnam | Đồng hồ áp lực 86713909 |
| PRESSURE GAUGE 0-16B | |
| Gardner Denver Vietnam | Van hiệu chỉnh áp lực 89534099 |
| PRESSURE REGULATOR | |
| Gardner Denver Vietnam | Van an toàn VP1027033 |
| SAFETY VALVE R1/2 14 | |
| Gardner Denver Vietnam | Van một chiều 89597779 |
| CHECK VALVE | |
| Gardner Denver Vietnam | Van tiết lưu 30895408 |
| ORIFICE BUSHING | |
| Gardner Denver Vietnam | Gioăng dẹt 80034799 |
| SEAL | |
| Gardner Denver Vietnam | Giăng tròn 89730639 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 89730509 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 89730489 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 86906369 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 89730359 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 89573939 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 80704929 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 89565109 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 89560299 |
| O-RING | |
| Gardner Denver Vietnam | Giăng tròn 89725659 |
| O-RING | |
| Pioneer Vietnam | Model: AVH-X8650BT |
| Pioneer Vietnam | Model: AVH-X1650 |
| Pioneer Vietnam | Model: AVH-X5650BT |
| Pioneer Vietnam | Model: TS-A1675S |
| Pioneer Vietnam | Model: TS-G1644R |
| Pioneer Vietnam | Model: TS-D1720C |
| Pioneer Vietnam | Model: TS-WX120A |
| Pioneer Vietnam | Replaced by: TS-W310S4 |
| (Model: TS-W310D4) | |
| Allen Bradley Vietnam | Printed Circuit Board |
| 20D-DL2-ENET0 | |
| PHASE 2 CONTROL WITH EXPANDED CASSETTE AND DRIVE LOGIX5730,CONTROL,For:POWERFLEX 700S | |
| Allen Bradley Vietnam | Printed Circuit Board |
| 1788-CNC | |
| COMMUNICATION,For:DRIVELOGIX CONTROLNET (COAX) | |
| Allen Bradley Vietnam | Encoder ROTARY,INCREMENTAL |
| 845H-SJDN26DRY2C | |
| 8-24VDC,5000PPR/REV | |
| Allen Bradley Vietnam | Encoder ROTARY,INCREMENTAL |
| 845H-SJDN26FWY2C | |
| DC24V,1024PULSE/REV,FLANGE | |
| Ross Controls Vietnam | Solenoid valve |
| Model: J2773B7001 | |
| Supply Voltage: 220VAC | |
| Ross Controls Vietnam | Solenoid valve |
| Model: J2774B7001 | |
| Supply Voltage: 220VAC | |
| Allen Bradley Vietnam | Code: MPL-B430P -MJ74AA |
| EBM Vietnam | Code: 8314 HR |
| 0.170 kg/pc | |
| EBM Vietnam | Code: 614 NHHR |
| 0.15 lbs/pc | |
| Honsberg Vietnam | Code: VM-040GR040A |
| VM-. ..GR: Flow | |
| 040: DN 40 – G 1 1/2 | |
| G : Female thread | |
| R : red Bronze | |
| 040 : 10-40l/min | |
| A: Optional for ATEX | |
| (for switching head ATEX A-V2 or A-V3 | |
| (The switching head is ordered | |
| in addition) | |
| Honsberg Vietnam | Replaced by: VM.WPS-040RI |
| Volt: 250 Vdc | |
| Amps: 6 A | |
| Adj. Range: 30 ~ 150 lit/min H2O | |
| T Max: 90 oC | |
| Unit weight : 3 kg / pcs | |
| (VM-040.GM150.IP65) | |
| Ametek Vietnam | Code: US-11 |
| 2-Wire Ultrasonic Transmitter | |
| Enclosure: PBT (Valox),NEMA 4X / with display / keypad | |
| Protocol: HART | |
| Sensing Element Material: CPVC | |
| Insertion Length: 6 1/2 INCHES | |
| Mounting: 2″ NPT 3/4″ NPT FM,FMc,IECEX | |
| Modifications: None | |
| Country Approvals | |
| KG Auto Vietnam | Art no: KDX-GMV21Y (KDX – GMV21Y) |
| KG Auto Vietnam | Art no: KG-L001 |
| Allen Bradley Vietnam | Code: 700-M400-Z2 |
| Note: Please confirm the code | |
| Allen Bradley Vietnam | Code: 195-MA-04 |
| Note: Please confirm the code | |
| Allen Bradley Vietnam | Code: 140M-C-ASA |
| Note: Please confirm the code | |
| Allen Bradley Vietnam | Code: 140M-C2E-C16 |
| Allen Bradley Vietnam | Code: 140M-C2E-B40 |
| STEGO Vietnam | Part No. 01170.0-00 |
| Mechanical Thermostat FZK 011 | |
| AC 230 V | |
| Bosch Rexroth Vietnam | R412007697 |
| RV1-G012-8,0 BAR | |
| Ametek Vietnam | Model: RTC156- B-230-A- SMX- DLC-R2- EASD- TR |
| (RTC156-B-230-A-SMX-DLC-R2-EASD-TR) | |
| Reference Temperature Calibrator, model RTC-156B: | |
| – Temp. range (@ 23°C): -30 to 155°C | |
| – Accuracy: With int. ref. sensor: ± 0.10°C | |
| – Stability: ± 0.005°C; Time to stability (app.): 10 min | |
| – Resolution: 1°, 0.1°, 0.01° or 0.001° | |
| – Radial homogeneity (difference between holes): 0.01°C | |
| – Communication: USB 2.0 port | |
| – Immersion depth: 160 mm | |
| – Full color VGA display 5.7″ | |
| – Automatic calibration without PC | |
| – Automatic step function, Automatic switch test | |
| – Input for RTD, TC, V, mA | |
| – Input for DLC sensor & STS ref. sensor | |
| – Transmitter supply: 24VDC+10%, max. 28mA | |
| – Transmitter input: 0-24mA; Acc: ±(0.005%rdg + 0.010%FS) | |
| – Voltage input: 0-12VDC; Acc: ±(0.005%rdg + 0.01%FS) | |
| – Download/ Upload work-order from/ to PC | |
| – Power supply: 230V, 50Hz, 400W max. | |
| Set includes: | |
| RTC156B, Power cable, ISO17025 Calibration certificate, Set of metric insert, Tool for insert, Jofracal software, USB cable, Set of rubber cones, Test leads, Manual, DLC sensor, STS100 ref. sensor, Carrying case & Support rod set | |
| Ametek Vietnam | Order No. 127279 |
| Application Kit for calibration of sanitary sensors | |
| – Including: STS102A030EH, Recalibration Tube, Manual, | |
| 5-Pack Undrilled Flange Insertion Tubes with Cable Groove, Carrying Case | |
| SINFONIA Vietnam | Drive Unit: CF-1 |
| With Trough for CF-1 (SUS304), T1.5xW100xH40xL380 | |
| Unit weight: 7.5kgs | |
| Dimension: 100X380X40mm | |
| SINFONIA Vietnam | Controller: C10-1VCF |
| Unit weight: 0.5kgs | |
| Lightstar Vietnam | KAA-80 (AC CURRENT METER) C.T 120A/5A |
| (KAA-80/5A) | |
| MARK-10 Vietnam | COF gauge |
| Model: M5-2-COF | |
| 1 set including accessories: | |
| Carrying case with hook, chisel, cone, V-groove, flat, extension rod, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESURTM Lite software, MESURTMgauge DEMO software, and user’s guide), and NIST-traceable certificate of calibration with data. | |
| Unit weight: 0.5kgs | |
| Takuwa Vietnam | Pressure Sensor (10m range) |
| Model: LSCN-10 | |
| Unit weight: 1.5 kg/pc | |
| Sick Vietnam | Art no: 1026516 |
| Code: DT500-A211 | |
| Sick Vietnam | Art no: 1044053 |
| Code: DML40-2-1111S01 | |
| Note: special product, and i can’t offer it | |
| Metrix Vietnam | Mech Switch MW 5550-411-361 |
| MW 5550: 5550-ABC-DEF Mechanical Vibration Switch (Base Model) | |
| A: Hazard Rating – ATEX, IECEx Flame Proof, Ex d IIB + H2, T6 (B=1 or 2) | |
| B: Contacts – SPDT | |
| C: Full Scale Range – 5 g | |
| D: Reset Coil & Start Up Delay – 24 VDC, 3.0A – 10g / 2.5A – 5g / 1.2A – 2g (If C=2, unit may not be mounted horizontally) | |
| E: Wiring Entry/Mounting Plate – M20 X 1.5; METRIX 5173 / 5175 | |
| F: Environmntal Rating – NEMA 4X, IP 66, CE | |
| (5550-411 -361) | |
| Metrix Vietnam | Seismic ST 5484E-121 -032-00 (ST5484E-121 -032-00) |
| ST5484E-AAA-BCD-EF IPT Seismic vibration transmitter, loop powered (Base Model) | |
| A: Full Scale Range – 1.0 ips (25.4mm/SEC), pk | |
| B: Mounting Stud – INTEGRAL 1/4″ NPT STUD MOUNT, 303 SST | |
| C: Hazard Rating – ATEX, Ex ia IIC, T4, Intrinsically Safe | |
| D: Connection – 4-20mA, 2 Pin Terminal Block | |
| E: High Pass Filter – No Filter (2 Hz), Standard | |
| F: Low Pass Filter – No Filter (1500 Hz), Standard | |
| Metrix Vietnam | Seismic ST 5484E-121 -132-00 (ST5484E-121 -132-00) |
| ST5484E-AAA-BCD-EF IPT Seismic vibration transmitter, loop powered (Base Model) | |
| A: Full Scale Range – 1.0 ips (25.4mm/SEC), pk | |
| B: B: Mounting Stud – INTEGRAL 1/2″ NPT STUD MOUNT, 303 SST | |
| C: Hazard Rating – ATEX, Ex ia IIC, T4, Intrinsically Safe | |
| D: Connection – 4-20mA, 2 Pin Terminal Block | |
| E: High Pass Filter – No Filter (2 Hz), Standard | |
| F: Low Pass Filter – No Filter (1500 Hz), Standard | |
| Bentone Vietnam | For the Bentone Burner BG 400 |
| Spare part for BG400: | |
| Bentone Vietnam | 0092070101 |
| CONTROL BOX LME21.230C2E | |
| (Control Box LMG 21.230 B 27) | |
| Bentone Vietnam | 11531901 |
| PRESSURE SWITCH LGW3A2 | |
| (Pressure Switch LGW) | |
| Bentone Vietnam | 11852303 |
| TRANSFORMER CPL BG300-800 | |
| (Ignition Transformer) | |
| Bentone Vietnam | 12026304 |
| IGNITION CABLE KIT BG300-BG950 | |
| (Ignition Cables Set) | |
| Bentone Vietnam | 11905101 |
| IGNITION ELECTR L183 BG300-400 | |
| (Spark Electrode) | |
| Bentone Vietnam | 11905102 |
| IONISATION ELECTRODE BG300-400 | |
| (Flame Probe) | |
| Bentone Vietnam | For the Burner STG 146 /2 |
| Spare part for STG146 /2: | |
| Bentone Vietnam | 92070001 |
| CONTROL BOX LME11.230 SPP | |
| (Control Box LME ? 11.230C2E 1) | |
| Bentone Vietnam | 11531906 |
| GAS PRESSURE SWITCH LGW10A2 | |
| (Pressure Switch LGW) | |
| Bentone Vietnam | 12064401 |
| TRANSFORMER EBI 4 1P 33% | |
| (Ignition Transformer) | |
| Bentone Vietnam | 12068535 |
| IGNIT/IONISATIONCABLE L=350 | |
| (Ignition Cables Set) | |
| Bentone Vietnam | 11534704 |
| IGNITION ELECTRODE BG100-200 | |
| (Spark Electrode) | |
| Bentone Vietnam | 11534703 |
| IONISATION ELECTRODE BG100-200 | |
| (Flame Probe) | |
| Setra Vietnam | Correct: 2061-30CPG-2M-11-02-CN |
| Option 901 is now represented in the part number by C. | |
| • 30CP=0-3000PSI range, not the 0-2000PSI range stated. | |
| • 2’ cable is standard termination; I’ve used it in pricing below. | |
| (Model: c206 | |
| seria: 2609076 | |
| range:0-2000psig | |
| power:24vdc | |
| out put :4-20ma | |
| option:901) | |
| Schneider Vietnam | Code: OVA45009 (OVA 45009) |
| STEPPER 0,5/1NC | |
| MLS-Lanny Vietnam | E2B40CF |
| 1/4″ Regulating valve 0-40bar | |
| In put: 4-20mA | |
| Output: 4-20mA | |
| with input pressure control and comparator | |
| (G1/4,24VDC,1.8A | |
| PN:E2B40CFEL,PN50,4-20mA, | |
| SN: 81781) | |
| MEANWELL Vietnam | DC Power Supply |
| Model: DR-75-24 | |
| MEANWELL Vietnam | DC Power Supply |
| Model: DRP-240-24 | |
| MEANWELL Vietnam | DC Power Supply |
| Model: DR-120-24 | |
| Lambda-TDK-Densi Vietnam | Code: MC1220DIN |
| Lambda-TDK-Densi Vietnam | Replaced by: RSEL2020D |
| (Code: MC1220DIN) | |
| Lambda-TDK-Densi Vietnam | Code: RSEL-2003W |
| Comsoft Vietnam | Model: FNL 400-7-G04-3 |
| Kett Vietnam | Model: LZ-373 |
| Kett Vietnam | Model: LZ-200J |
| Warex Vietnam | Warex-butterfly valve, |
| Type: DKZ 110 for mounting between flanges, | |
| drilled in acc. to DIN 2501, PN 6, body of silumin (G-AlSi10Mg) | |
| sealing element of Buna CB, replaceable | |
| disc of steel, shaft of stainless steel 1.4057, shaft sealing with O-rings | |
| bearing bush of brass | |
| carryover : | |
| – DN 350 | |
| face to face: 67 mm | |
| – fitted with pneumatic actuator, type: AT 450.DR – double acting – air supply necessary: 6 bar | |
| – with mounted 5/2 way solenoid-valve, | |
| Norgren Herion, type 2623077.3037 voltage: 24 V DC | |
| 1,6 W – Namur interface – protection IP 65 | |
| – fitted with 2 proximity sensors | |
| make: P+F, type: NBN4-12GM50-E2 inductive, 3-wire, NO-function pnp voltage: 10-30 V DC, with LED mounted in housing | |
| incl. Namur mounting bracket | |
| (Buterfly valve with pneumatic actuator, solenoid valve, mechanical limit swiches and fluid disc. | |
| • DN 350 | |
| • Operating Temperature: – 40°C to + 200°C | |
| • Differential Pressure: up to 6 bar | |
| • Actuator: DR 450) | |
| Festo Vietnam | Art no: 553118 |
| Code: MHJ9-QS-4-MF | |
| Argo-Hytos Vietnam | Model: V7.1230-153K1 (SAP 15449001) filter element |
| Note: the above suffix code ‘K1’ is for factory packaging identification purpose (internal use only), it will not appear on the actual product | |
| Balluff Vietnam | Replaced by: BOS01LE |
| Description: BOS 6K-PU-LH10-S75 | |
| Net weight: 0.023 KG | |
| (Ordering code: BOS00A0 | |
| Description: BOS 6K-PU-1LHA-S75-C) | |
| Balluff Vietnam | Ordering code: BES00H3 |
| Description: BES 516-3005-G-E4-C-PU-02 | |
| Net weight: 0.038 KG | |
| (Proximity switch d=5mm PNP BES516-3005G-E4-C- PU 5( 150160316)) | |
| Baumer Vietnam | ITD 20 A 4 Y129 400 H BX KA1,7 E 14 |
| Incremental Encoder Optical | |
| – Material no. 11075778 | |
| – old material no. 320528 | |
| – Incremental Encoder | |
| – 400 pulses/rev. IP54 | |
| – A-, B- track | |
| – HTL UB= 8 – 30 VDC GT-output | |
| – cable: 1,70 m axial | |
| – hollow-shaft: 14,00 mm | |
| – operating temperature: | |
| – -20°C to +100°C | |
| – mounting kit: 43 | |
| Stauff Vietnam | Code: SMD20-G1/4-V-OR-C6F |
| Bourns Vietnam | Correct: 3590S-2-102L |
| (Code: 3590S-2-102) | |
| Festo Vietnam | Art no: 153495 |
| Code: LRMA-QS-4 | |
| Eliweli Vietnam | Replaced by: ID974LX 12V NTC |
| (Code: ID plus 974) | |
| Balluff Vietnam | Ordering code: BTL0KJC |
| Description: BTL5-S111B-M0200-H-K | |
| Ametek U.S. Gauge Vietnam | Code: 150376 |
| Model: 1933 Gauge | |
| Ametek U.S. Gauge Vietnam | Code: 415128C |
| Model BAC Bimetallic Thermometer, with 5″ dial | |
| (Code: 415128 | |
| ,size 5”,304 SS | |
| Dải đo 0-2500F(0-1000C)) | |
| Ametek U.S. Gauge Vietnam | Code: 150375 |
| MODEL: 1933 Gauge | |
| UE Vietnam | UE Model No.: J403-451 |
| Pressure switch : 0 “WC – 80”WC | |
| Pressure Sensor : Buna N Diaphragm and O-Ring | |
| Pressure Connection : ¼” NPT Electrical | |
| Entry : 7/8” NPT | |
| Contact : 3 x SPDT | |
| SAKAE Vietnam | Model: 22HP-10 2K-OHM +/-5% Lin=+/-0.25% |
| SAKAE Vietnam | Model: CP45 1K-OHM +/-3% Lin=+/-0.5% |
| Festo Vietnam | Art no: 188082 |
| Code: AEVC-12-5-I-P | |
| (Code: AV-12-4) | |
| Festo Vietnam | Art no: 195983 |
| Code: DSNU-32-80-P-A | |
| (Code: DSW-32-80-P-B) | |
| Festo Vietnam | Art no: 193990 |
| Code: DSNU-20-25-P-A-R3 | |
| (Code: DSN-20-25P-R10) | |
| Festo Vietnam | Art no: 161353 |
| Code: DSNU-20-25-P-A-S10 | |
| (Code: DSN-20-25P-R10) | |
| Festo Vietnam | Art no: 195982 |
| Code: DSNU-32-50-P-A | |
| (Code: DSW-32-50-P-B) | |
| Festo Vietnam | Art no: 5098 |
| Code: ESN-20-10-P | |
| Festo Vietnam | Art no: 195874 |
| Code: ESNU-40-25-P | |
| (Code: ESW-40-25-P-B) | |
| Releco – Comat Vietnam | C2-A20/DC36V R |
| S2-B R | |
| Releco – Comat Vietnam | C4-A40X/DC24V R |
| S4-J R | |
| Releco – Comat Vietnam | C2-T21X/AC24V R |
| Releco – Comat Vietnam | C5-M10/DC24V R |
| S5-SR | |
| E2S Vietnam | Correct: AL105NXAC230R/A |
| AL105NX 230V ac Red/Amber | |
| (AL105NAC230R/A) | |
| Biotech Vietnam | Art.-No.: 82202705 |
| Model: FCH-34-mobile-LCD, PP | |
| Plexiglas, 2 x G 3/4 “ | |
| (Digital flowmeter | |
| Model: FCH-34-PP | |
| Art number : 82202705) | |
| Advance Vietnam | Plastic Bottle Burst Strength Tester |
| Model: AL-BS3000 (AL BS3000) | |
| Advance Vietnam | AL-BS3000/wcs |
| Water re-circulation System | |
| Self-contained internally re-circulating water supply | |
| -Included stainless steel machine stand and drawer | |
| Motovarrio Vietnam | Code: 9715309 |
| Moog Vietnam | valve |
| J869-0052 | |
| Weight: 1.1kg | |
| HBM Vietnam | Model: AE101 |
| HBM Vietnam | 1-AE101 |
| DC amplifier (10Hz/ 6kHz) | |
| (Model: AE101) | |
| Fuji Vietnam | Model: PXR5TCY1-8W000-C |
| Kimo Vietnam | Máy chính MP200G |
| Kimo Vietnam | Module đo áp xuất MDP10000 |
| Kimo Vietnam | 2 Ống silicon dài 1000mm (Trắng & đen) |
| Note: Giá đã bao gồm | |
| Kimo Vietnam | Ống Pitot dài 150mm: |
| Kimo Vietnam | TPL-03-200 (ống pitot loại L, đường kinh 3mm, dài 200mm) |
| Kimo Vietnam | TPL-03-300 (ống pitot loại L, đường kinh 3mm, dài 300mm) |
| Kimo Vietnam | TPL-06-300 (ống pitot loại L, đường kinh 6mm, dài 300mm) |
| Kimo Vietnam | TPL-06-500 (ống pitot loại L, đường kinh 6mm, dài 500mm) |
| Kimo Vietnam | Chứng chỉ hiệu chuẩn. (của nhà máy,) |
| Note: Giá đã bao gồm | |
| Kimo Vietnam | Phần mềm gồm 1 đĩa CD và Cáp kết nối máy tính dạng USB (LPCF Software (CD-Rom) supplied with USB interface for connection to PC (cable) |
| Kimo Vietnam | Đầu đo nhiệt độ (- 200 ~ 1300◦C) |
| Note: Khách không cần mục này nữa | |
| Noeding Vietnam | DIGITAL CONTACT GAUGE PM |
| Model: PM82-3210-310 | |
| Power Genex Vietnam | Model: EPR-WN2SN4NTR |
| IDM Instruments Vietnam | MODEL NO: C0008 |
| COEFFICIENT OF FRICTION TESTER | |
| Includes: | |
| Moving Plane with COF Chart | |
| Cutting Template Sled: 63.5mm x 63.5mm | |
| Cutting Template Moving Plane | |
| Rigid Connecting Rod | |
| 200g Sled | |
| Packed Dimensions: (Box) | |
| 35cm x 35cm x 93cm @ 20kg | |
| (Model: C0008 COF) | |
| IDM Instruments Vietnam | MODEL NO: C0008-VS |
| COEFFICIENT OF FRICTION TESTER | |
| Includes: | |
| Moving Plane with COF Chart | |
| Cutting Template Sled: 63.5mm x 63.5mm | |
| Cutting Template Moving Plane | |
| Rigid Connecting Rod | |
| 200g Sled | |
| Packed Dimensions: (Box) | |
| 35cm x 35cm x 93cm @ 20kg | |
| (Model: C0008 COF) | |
| IDM Instruments Vietnam | C0008-1: Heated Platen |
| IDM Instruments Vietnam | C0008-6: COF Data Acquisition Software with Interface Cable |
| IDM Instruments Vietnam | C0008-13: 180 Degree peel fixture rod |
